forbot
Korporaciya Gidroeleks
+38 (057) 714-14-70
  • Korporaciya Gidroeleks
  • Products catalog
  • Installation for hydrotests of the threaded connection the coupling pipe of pump and compressor pipes
Installation for hydrotests of the threaded connection the coupling pipe of pump and compressor pipes
  • Installation for hydrotests of the threaded connection the coupling pipe of pump and compressor pipes
  • Installation for hydrotests of the threaded connection the coupling pipe of pump and compressor pipes
  • Installation for hydrotests of the threaded connection the coupling pipe of pump and compressor pipes
  • Installation for hydrotests of the threaded connection the coupling pipe of pump and compressor pipes
  • Installation for hydrotests of the threaded connection the coupling pipe of pump and compressor pipes

Installation for hydrotests of the threaded connection the coupling pipe of pump and compressor pipes

In stock
from 1 UAH
Brand:Гидроэлекс
Country of manufacture:Ukraine
Description

Installation is intended for sealing of the muftovy end (on the outer diameter of the coupling and on the internal diameter of a pipe) pump and compressor pipes when carrying out hydraulic tests of the threaded connection the coupling pipe on durability and tightness (GOST 633-80, GOST P 53366-2009, API Spec 5CT).

 

 

Installation allows to work with the following range of pipes:

 

Nominal diameter of a pipe, mm

Thickness of a wall, mm

Type of pipes

Maximum test pressure,

MPa (kgf/cm2)

Normative document

smooth

from the ends landed outside - In

48

4,0

DKE

DKE

68,6 (700,0)

 

GOST 633-80,

GOST P 53366-2009,

API Spec 5CT

60

5,0

DKE

DKELMR

73

5,5

7,0

DKELMR

DKELMR

DKELMR

DKELMR

89

6,5

8,0

DKELMR

DKELMR

DKELMR

102

6,5

DKELMR

DKELMR

114

7.0

DKELMR

DKELMR

 

Installation productivity (at test of the pipe Ø73 of mm, with the mm Ø89 coupling pressure of 68,6 MPas) – not less 4th pipes/hour.

 

Loading/unloading of pipes on a position of test is carried out by the shop crane (other ways of giving are possible, easily adapts to the technological line of the customer).

 

The carving, internal and external surfaces of the tested pipe and the coupling have to conform to requirements of GOST 633-80.

 

Installation provides normal working capacity at air temperature from 5 °C to 40 °C.

 

The maximum test pressure – 68,6 MPas (700 kgfs/cm2).

 

Note:

Development of installation with test pressure of 1250 kgfs/cm2 and more is possible.

 

As working liquid when carrying out hydraulic tests inhibited water, water emulsion solutions, and other not aggressive liquids is used.

 

Note:

Working liquid should not contain the weighed particles which size exceeds 100 microns. A lot of pollution should not exceed 0,1%.

 

According to the separate arrangement, the installation chief installation made by specialists of Gidroeleks Corporation is possible.

 

The following main knots are included in the package of delivery of installation:

 

1. A head test for smooth pipes – 1 piece.

 

1.1. A set of replaceable parts for test of smooth pipes – 1 set.

 

1.2. A set of replaceable parts for test of pipes from the end landed outside and the coupling – 1 set

 

Note:

Test heads are ordered separately, depending on a range of the tested pipes.

 

2. Cuffs are test:

for internal consolidation of a pipe – 2 pieces.

for external consolidation of the coupling 2 pieces.

 

Note:

Production and delivery of additional cuffs is carried out according to the separate specification.

 

3. The carriage with a basic hydraulic cylinder for placement of test heads 1 piece.

4. A frame with a water emulsion tank and the pallet – 1 piece.

5. The mechanism of fixing of a pipe with the hydraulic drive – 1 piece.

6. The mechanism of fixing of the coupling with the hydraulic drive – 1 piece.

7. Maslostantion 1 piece.

8. The hydraulic control panel with the equipment – 1 piece.

9. A set of executive hydraulic cylinders – 1 set.

10. A set of a connecting fitting and pipelines 1 set.

11. Instrumentations (manometers etc.) 1 set.

12. Water emulsion pump installation of filling of a pipe (R =3 kgfs/cm2) 1 piece.

13. Multiplicatory installation of high pressure (R =700 kgfs/cm2) – 1 piece.

14. The water emulsion valvate equipment – 1 set.

15. The control panel of the operator – 1 piece.

16. The personal computer with the software for recording, certification and storage of results of tests – 1 set.

17. A power board (industrial network of 380 V of alternating current) – 1 piece.

18. A set of measuring and discrete sensors 1 set:

19. A set of connecting cables 1 set.

20. The technical means necessary for service of a press (devices and the ZIP) 1 set.

 

The list of the technical documentation transferred by the Supplier

 

Passport.

Technical specification and maintenance instruction.

Construction task for the bases.

Task for a supply of energy carriers.

The sketch of the supporting framework for a pipe on a test position.

 

Manufacturer's guarantee

 

 

Warranty period of operation of installation — 12 months from the date of input of the device in guarantee operation, but no more than 18 months of the delivery date, at observance of conditions of transportation, storage, installation and operation. A warranty period of storage (without represervation) — 6 months.

 

 

 

 

Characteristics:
Brand:Гидроэлекс
Country of manufacture:Ukraine
Information is up-to-date: 29.01.2018

Read more

Unbelievable price on Installation for hydrotests of the threaded connection the coupling pipe of pump and compressor pipes in Kharkov (Ukraine) company Korporaciya Gidroeleks.
Similar products